Job SummaryGeneral facility maintenance and repair duties as directed. Pneumatic and direct digital control experience. Knowledge of air conditioning and refrigeration including ice machines. Experienced in troubleshooting and repair of HVAC equipment. Ability to cut and thread pipe to meet base fabrication needs. Maintain and install filter systems. Some knowledge of medical gas systems. Install and maintain circulating pumps. Knowledge of high-pressure steam boilers and delivery systems. Estimate and requisition materials needed for projects. Working knowledge of OSHA, State, DOH and Hospital Safety Standards. Ability to analyze and troubleshoot Electrical controls. Additional electrical experience is helpful. Experienced in all forms of soldering. Ability to understand and complete preventative maintenance programs. Be able to perform heavy lifting and climbing. Ability to perform snow removal duties including shoveling salting and working knowledge of snow plow operations. Strong self-motivation is expected.Core Job Responsibilities55% Work order response: but not limited to area temperature problems throughout the Facility. Replacing/repairing pump and circulators. Repairing and charging refrigerant systems. Adding or moving equipment for construction projects. 25% Preventive maintenance duties: Typical but not limited to filter changes, coil cleaning, and belt changes. Ice machine cleaning and service. 10% Compliance with regulatory responsibilities: Ensure appropriate function is maintained to comply with various regulatory agencies. Refrigerant reclaiming, and Fire barrier repair. 10% Quality Improvement: to look for ways to improve the patient/visitor experience. Update heating and cooling systems. Modifying or move HVAC components or sensors for improve comfort. Education/Experience RequirementsRequired:High School or equivalent,5 years of HVAC ExperiencePreferred:Associates or higher degree3-5 years of Healthcare Facilities or Trade Experience Licensure/Certification RequirementsRequired:Universal Refrigerant Reclaiming licenseDisclaimerQualified applicants will receive consideration for employment without regard to their age, race, religion, national origin, ethnicity, age, gender (including pregnancy, childbirth, et al), sexual orientation, gender identity or expression, protected veteran status, or disability.Successful candidates might be required to undergo a background verification with an external vendor.Job DetailsReq Id 89077Department ENGINEERINGShift DaysShift Hours Worked 7.50FTE 0.94Work Schedule UFCSMEmployee Status A1 - Full-TimeUnion 2006 - UFCWPay Range $21 - $27 Hourly#GP01

Pay Rate: $15.00/hr - $24.00/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. Why Guitar Center Here’s just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assigned Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .Requirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products

Req ID:443086Address: 1262 Route 414 Waterloo, NY, 13165Benefits: *$28.00 - $37.00 p/hr* Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions:Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.Expected salary range of $72,000 to $80,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k). PRIMARY PURPOSE OF POSITION Responsible for performing engineering and technical tasks, under direct supervision, in support of nuclear plant operations. PRIMARY DUTIES AND ACCOUNTABILITIESAssure all engineering products prepared are in accordance with applicable safety analyses, industry codes, and all regulatory requirements.Perform engineering and technical tasks as assigned by supervision.Support engineering work functions.MINIMUM QUALIFICATIONSBS Degree in Engineering (Chemical, Civil/Structural, Electrical, Industrial, Mechanical or Nuclear) PREFERRED QUALIFICATIONSEngineer in Training Certification

Dreaming big is in our DNA. It’s who we are as a company. It’s our culture. It’s our heritage. And more than ever, it’s our future. A future where we’re always looking forward. Always serving up new ways to meet life’s moments. A future where we keep dreaming bigger. We look for people with passion, talent, and curiosity, and provide them with the teammates, resources and opportunities to unleash their full potential. The power we create together – when we combine your strengths with ours – is unstoppable. Are you ready to join a team that dreams as big as you do SALARY: $38.74/hr. starting wageIncreased to $39.44 after 60-day probationary period2-Year contractual technical assessment allows potential $3.00 / hr increase upon successful testingContractual Full Utilization, allows maintenance technicians to signup, and work, all weekend and holiday overtime they want except for Christmas Day and New Years Day.SHIFT: Assigned based on seniority and preferenceCOMPANY:Michelob ULTRA. Cutwater Spirits. Budweiser. Kona Brewing Co. Stella Artois. Bud Light. That’s right, over 100 of America’s most loved brands, to be exact. But there’s so much more to us than our top-notch portfolio of beers, seltzers, and more. We are powered by a 19,000-strong team that shares our passion to create a future with more cheers. We look for people with talent, curiosity, and commitment and provide the teammates, resources and opportunities to unleash their full potential. The power we create together – when we combine your strengths with ours – is unstoppable. Are you ready to join a team that dreams as big as you do ROLE SUMMARY:If you are passionate about maintenance and troubleshooting while working in a fast-paced environment, Anheuser-Busch could be your next stop in fulfilling your career goals. Our Maintenance Electricians work in a team or independently within a high-speed manufacturing environment and are the key in guaranteeing that our quality is where it needs tobe:the very best. Opportunities available to maximize your earnings and expand your technical knowledge. If you are looking for a new challenge, come join our team today!JOB RESPONSIBILITIES:Troubleshoot and maintain PLC and variable speed drive controlled high speed production equipment and batch processes.Maintain the power distribution of plant equipment.Disassemble, repair, and reassemble equipment, using precision measurement tools.Interpret schematics and equipment manuals.Analyze process data and make decisions on equipment maintenance and improvement activities.Perform Preventive Maintenance (PM) and Predictive Maintenance (PdM) to increase equipment reliability and up-time.Utilize SAP to accurately andthoroughlydocument and track allcorrectiveand preventive maintenance performed throughout the course of the day;includingsearching and issuing parts, documenting equipment issues and entering inspection/measurement points.Prioritize and self-schedule maintenance work around production activities to achieve both production and maintenance KPI's.Drive brewery goals & objectives through individually led projects andcontinuousimprovement activities.JOB QUALIFICATIONS:High School Diploma or GED required.3 year industrial electrical/programming experience or two-year technical degree preferred.PLC experience preferred; Multiple platforms such as Allen Bradley PLC5, Control Logix, and Siemens programming and troubleshooting experience preferred.Knowledge of variable frequency drives, servo motors, and motor control systems up to 480 volts required.Ability to troubleshoot problems, identify root causes (e.g. six sigma analysis) and propose and implement remedies.Ability to perform calibrations, installation and maintenance of process and analytical instrumentation.Ability to read and interpret electrical schematics,troubleshoot and re-wire high speed and/or highly automated equipment such as AC/DC motors, VFDs, PLCs, servo motors, and PLC I/O modules.Strong computer skills required; Microsoft Office Excel proficiency as well as Computerized Maintenance Management Systems experience preferred.Experience in computer networking (routers, Ethernet, switches, etc.) preferred.Mechanical troubleshooting experience in high-speed packaging and/or highly automated continuous process environment preferred (valve replacement, conveyor bearing and chain replacement, motor/gearbox replacement, lube routes)WHY ANHEUSER-BUSCH:Anheuser-Busch has always dreamed big. It’s who we are as a company. It’s our culture. It’s our heritage. And more than ever, it’s our future. A future where we’re always looking forward. Always serving up new ways to meet life’s moments. A future where we keep dreaming bigger. To reimagine what a beer company can be. And what, together with our people and our partners, Anheuser-Busch can do. Our collective impact is significant. Over the last decade alone, we have contributed more than $400 million to charitable organizations that support our communities, provided over 90 million cans of emergency drinking water, and, together with our wholesaler partners, invested more than $1 billion into responsible drinking initiatives. At the heart of these investments is our shared commitment to community – providing opportunity for our people, lifting our neighbors, and making a meaningful difference in the world. This future is our purpose. A future that everyone can celebrate, and everyone can share in. A future with more cheers.BENEFITS:Health benefits including Medical, Dental, Vision, Wellness and Tax-Advantaged Savings and Spending AccountsLife Insurance and Disability Income ProtectionGenerous Parental Leave and FMLA policies401(k) Retirement Savings options with a company matching contributionChance to work in a fast-paced environment among a company of ownersFree Beer!#AC-3

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily. WHAT WE OFFER We are a large company serving many unique customers – because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering:Ongoing Education & TrainingExposure to a Large Variety of ProjectsIndustry-leading Benefit PackagesAdvanced support and tools designed to improve your workflowPay $22-$36 an hour DOE Responsibilities: This position is responsible for the installation of refrigeration systems following customer specifications, applicable building codes, and proper piping practices.Provide support on construction job by piping cooler boxes and refrigeration cases, including electrical wiring as required to complete the project.Providesthe required installation of pipe hangers as directed by the foreman.Provides construction support by welding and slip-hosing copper pipes, and assist the foreman as needed on the job.Provide support by handing cooler box coils and installing new supermarket refrigeration systems or remodeling existing supermarket refrigeration systems.Perform other duties and projects as assigned. Qualifications: High school diploma or GED equivalent work experience and trade or technical school classes5+ years of experience in the construction industry preferred and hands-on field experience in commercial refrigeration, electrical, and/or fixtures construction.EPA Certification (Type II)Experience in copper brazing, and market remodeling.Good drivingrecord.Knowledge of electrical systems and ability to wire installations.Knowledge of carpentry.Knowledge of refrigeration systems and piping of refrigeration equipment.Knowledge of plumbing and pipe fittings, and ability to pipe refrigeration equipment.Knowledge of and ability to read blueprints on refrigeration, electrical, and plumbing.Ability to hang evaporation coils and install overhead hangers.Ability to use hand and power tools and good mechanical skills.Knowledge of job site safety, ability to oversee work activities to ensure safe work practices, and safety rule compliance.Ability to work with minimal supervision. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Journeyman-HVAC, Journeyman-EMS, EMS, Installer, Install, Installation, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, mechanical, mechanic, AC, field service, chiller, specialist, HVACR, Electrical, pipefitter

INDUSTRIAL MAINTENANCE TECH Liverpool, NY 13090, USAReq #20223 Monday, June 10, 2024 As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers large and small package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility.People • Customers • Trust Pay and Benefits Pay Range from $26.31- $35.98 based on skills and experience. Excellent Benefits Package including Health, Dental, Vision, and 401K Plan. 1.5 pay over 8 hours, over 40 hours. 1.5 pay on holidays, plus additional overtime over 8 hours on holidays. Uniforms provided. Up to 100 paid training hours annually for technicians to advance through the progressive skill levels. Stipend for safety shoes, safety glasses and tools. RESPONSIBILITIES: Perform a variety of maintenance tasks to diagnose, repair, rebuild, replace mechanical, electrical, PLC, hydraulic and pneumatic systems on all plant equipment and facilities. Use maintenance knowledge to increase productivity, decrease downtime and waste. Work with a sense of urgency to respond to machine downtime events. Will be required to complete in-house training programs to develop equipment specific maintenance skills.The position may also require attendance at external training that may require occasional overnight travel. Must be able to follow all safety and company policies that include lock-out tag-out procedures. BASIC QUALIFICATIONS: At least 1 year of experience successfully troubleshooting and repairing industrial manufacturing equipment. Must have knowledge and experience with repairing and maintaining mechanical, electrical, hydraulic, pneumatic, PLC systems and industrial equipment. Be passionate about maintaining a safe and clean work environment. Ability to work any shift, overtime, and weekends as needed. Must have own basic tools (PCA will provide specialized tools and an annual tool allowance). Must be authorized to work in the U.S. PREFERRED QUALIFICATIONS: Technical degree and/or comparable experience in successfully troubleshooting and repairing industrial machinery and equipment; particularly within the corrugated or packaging industry. KNOWLEDGE, SKILLS & ABILITIES: Excellent communication skills. Basic computer skills. Ability to work in a fast-paced environment. All qualified applicants must apply at Careers.packagingcorp.com to be considered.PCA is an Equal Opportunity Employer – Veterans/Disabled and other protected categories. Other details Pay TypeHourlyMin Hiring Rate$26.31Max Hiring Rate$35.98Job Start DateMonday, June 10, 2024

Monday – Friday, 7:00am – 3:30pmRate:First 60 days, $37.75/hr. 60 days to 16 weeks, $38.39/hr.16 weeks and pasts, pay will top out at $39.12/hr.Voluntary overtime offered in this positionSummaryInstall, maintain, diagnose, analyze, troubleshoot, make electrical and mechanical repairs, etc. toplant electrical, electronic, computer numerically controlled equipment, etc. and utilizing appropriate equipment. Analyze equipment, circuitry, diagnose troubles, repair, adjust, modify, service all types of electronic devices and systems.Major Duties and Responsibilities:Responsible for analyzing, troubleshooting and repairing manufacturing / plant equipmentPerforms preventive maintenance and calibration activities for the plant equipmentKnowledge of computers, PLCs and other electronicsTroubleshooting electrical capability and the ability to maintain all plant equipmentAble to install, test, repair, and replace motors, drives, controls, starters, lights and powerMust be able to work independently and as a member of a teamInput data into Carrier’s TMS work order and asset management systemFollow industry best practice of safety procedures, including Arc Flash Protection,and Lock Out Tag OutDemonstrate the initiative to investigate and offer improvements to plant operationsCommunicate appropriately with all site management employeesService, clean, inspect and repair equipment periodically following established PMsSafely operate mobile equipment such as fork trucks, carts, lifts, boom lifts, etc.Create notifications and follow up on needed repairs and order required partsSafely use basic hand and power tools such as a drill press, power saw, grinder, etc.Have an understanding of belts, belt drives, chain drives, gear boxes and conveyorsRead and interpret engineering drawing relative to the job assignedSafely use machining equipment such a band saw, drill press, lathe, etc.Install electrical systems & equipment according to NEC provisions & best practicesWorks safely and follow all established plant safety policies and proceduresPerform miscellaneous duties as requiredPrepare and order parts and material needed for jobsMinimum Standards:High School Diploma - Technical school preferredBasic computer skillsCombination of 5 years of Electrical experience, College Degree, technical school or formal apprenticeship program.Journeyman`s card3 to 5 years work experience in the Electrical trade in the previous 5 yearsExperience with controlsKnowledge of industry best practice of safety procedures, including Arc Flash Protection,and Lock Out Tag Out procedures.Pass skilled trade’s management interviewPass prescribed electrical testAbility to read and interpret blueprints, drawings, and sketchesRead and interpret engineering drawing relative to the job assignedBe able to perform advanced math calculationsBasic computer skills#Ejobs

What you will doDo you have HVAC experience We are looking for HVAC systems mechanics who have worked in light commercial and/or heavy commercial markets to join our team to work with the most advanced heavy commercial and industrial cutting-edge equipment.We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Journeyman must be skilled craftsmen in their trade, and we prefer a minimum of five (5) years actual, practical working experience in the HVAC plumbing, pipefitting and/or mechanical equipment service industry. You may be required to pass a satisfactory examination as to your special skill.Provide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of serviceHow will you do itMechanics must have practical working experience in light commercial or commercial mechanical equipment. May be required to satisfactorily pass an examination to identify special skills. Scope of work shall be limited to commercial HVACR service. Servicemen may partner with Journeymen in the repair of centrifugal, steam turbines, and absorption machines, open-drive screw chillers and ammonia systems. Perform maintenance, repair and replacement services on commercial heating and cooling systems. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredTwo (2) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry.Ability to commit to a 30-Hour OSHA Certification which is to be done after hours and weekends is required upon hireComputer savvy with good verbal and written communication skills.PreferredFive (5) years of Commercial and or industrial work experience in the HVAC industryRefrigeration Certification preferredEPA Universal Refrigerant CertificationPay Range: $45-$52 hourly rate determined by the CBA/rate sheet. Benefits are provided through a local labor union aligned with a collective bargaining agreement.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

$22.00/hourUp to $1,250 Retention BonusShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you ! Join our team of driven professionals at Avis Budget Group enterprise. What You'll Do: As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures. Perks You'll Get: Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, d ental and o ther i nsuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and location What We're Looking For: Valid Driver's License and good driving recordAt least 2 year s of auto repair experience or coursework with automotive certifications1 ASE certificat ion (ability to acquire 2 additional ASE certificat ions within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently , enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United States Previous Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage ! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions. Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards. We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate . Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law . This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group . SyracuseNew YorkUnited States of America

Superior Metals Manufacturing is currently looking for a Maintenance Technician to join our team! This is a great opportunity to join a company that is poised for substantial growth with opportunities for advancement. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, paid vacation, and other great benefits. We also offer competitive compensation with overtime opportunities readily available. JOB SUMMARY Perform intermediate skilled maintenance tasks on state-of-the-art equipment. Job duties include troubleshooting and repairing foundry equipment using standard Maintenance skills. Perform regular scheduled preventative maintenance tasks. Other maintenance duties depending on company and departmental needs. Salary Range:$25.09 - $43.56 $1,000 sign-on bonus for eligible candidates! PRIMARY RESPONSIBILITIES Monitor machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine.Lays out, assembles, installs, maintains, and repairs pipe systems and related hydraulic and pneumatic equipment. Assembles and installs electronic control systems for production machinery and associated automated equipment’s gauges, valves, pressure regulators, and related equipment.Perform preventive maintenance per schedule.Communicate with operators pre- and post-repair.Interact with operators to troubleshoot, repair and test equipment.Communicate with Team Leader and/or Maintenance Supervisor on major repair needs discovered.Complete, sign and submit work orders.Complete safety checklist on all work.Complete order list of equipment and supplies to be ordered.Review new equipment standard issues.Follow lock-out, tag out procedures.Housekeeping around the plant as necessary. QUALIFICATIONS Education: Associate's degree (A. A.) or equivalent from two-year college or technical school; or an equivalent combination of education and experience.3-5 years’ experience in a manufacturing environment.Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.Ability to write routine reports and correspond with co-workers and suppliers/vendors.Ability to read and interpret Electrical Pneumatic and Piping Schematics. Other Required Knowledge, Skills & Abilities: General knowledge of trades with quality experience in each. Skilled in use of standard mechanical hand tools. Good interpersonal skills. Good follow-up skills. Ability to troubleshoot. WORKING ENVIRONMENT Shop Floor: Manufacturing environment.Required PPE: Check for required PPE in areas you may be working inSafety Glasses: Needed in all areas of the plant.Steel toe shoes: Needed in all areas of the plant. Consolidated Precision Products is an Equal Employment Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, disability, veteran status, genetic information, or any other characteristic protected under applicable law. It is the policy of the company to comply with all aspects of the Americans with Disabilities Act. Upon request, the company will provide reasonable accommodations to individuals with disabilities who need an accommodation to fully participate in the application process. All roles are restricted to U.S. persons (U.S. citizens, permanent residents and other protected individuals under the Immigration and Naturalization Act) due to access to export-controlled technology. CPP will require proof of status prior to employment. Note that we maintain a drug-free workplace, and all offers of employment will be contingent on satisfactory results of a drug & background screen. This is a non-management positionThis is a full time position

Maintenance ElectricianConsolidated Precision Products (CPP) Syracuse has a need fora Maintenance Electrician to join our team. This position reports to the Maintenance Manager and performs high skilled maintenance tasks on state-of-the-art equipment.CPP-Syracuse is a manufacturer of premium investment castings for the Air Craft andIndustrial Gas Turbine industry and has been in business for over 80 years.This position would be on the 1st shift. This position qualifies for $1,000 sign-on bonus, 5% quarterly bonus plan and a competitive pay rate. $26-$40/hr depending on experience.Major Responsibilities: Responsible for inspection, maintenance and repair of plant wide production equipment.Experience with 480V 3 phase electrical power distribution systems.Must understand electrical theory and have the ability to apply it with strong troubleshooting techniques.Experience with troubleshooting, maintaining and repairing machine instrumentation and electrical controls.Experience with troubleshooting High Voltage systems and equipment.Must have a good understanding of hydraulic and pneumatic systems and associated components.Knowledge of PLC controls (Allen Bradley) and associated software including Ladder Logic Programming.Must have the ability to read and interpret electrical, hydraulic schematics and plant drawings.Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.Must perform Mechanical and Electrical preventative maintenance tasks on all production equipment.Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem.Responsible for adherence to all safety policies, practices and procedures. Requirements: Education:Associates degree (A.A.) or equivalent from two-year College preferred or electrical apprenticeship.Completion of a trade school or training is a plus.Experience:Experience in an industrial environment preferred.Electrical training or certification preferred.NFPA Certified Electrical Safety Technician (NFPA 70E)Preferred Skills: HVAC knowledge, robotic experience & computer network knowledgeGood judgment.Detail oriented CPP-Syracuse offers its employees a competitive compensation package which includes medical/dental/vision, Employer subsidized 401K, and life insurance.CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations.Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Calls Please.Disclaimer:The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. Additional duties and responsibilities may be required of the job holder based upon business needs and at the request of CPP Management.It is the policy of CPP Syracuse, Inc. to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status.EOE/M/F/DISABLED/VETERANS This is a non-management positionThis is a full time position

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:UPS is currently seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. Will maintain a diverse range of equipment including delivery vehicles, heavy duty on road tractors and trailers from a variety of manufacturers. Powered vehicle propulsion includes diesel, gasoline and alternative technology power plants (including compressed natural gas, liquefied natural gas, propane, hybrid and electrical in some locations). AutomotiveTechnicians must be skilled in troubleshooting and maintaining various systems including hydraulic brakes, air brakes, electrical and engine control. If you're looking for an exciting career in the automotive industry, we want to hear from you!Automotive Technicians must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need. Responsibilities and DutiesMeets D.O.T requirements and CDL qualifications required by job assignmentBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required, throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsMeets all requirements to be Power Industrial Truck Operations (PITO) certified Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand tools- PREFERREDClass B Commercial Driver's License (CDL) – PREFERREDNY State Inspection License – REQUIREDWorks full time shifts: 8 hours per dayDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $38.22 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Pay Rate: $15.00/hr - $24.00/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. Why Guitar Center Here’s just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assigned Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .Requirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products

What this job involves: We are hiring a Maintenance Mechanic to join our team in Syracuse, NY. In this role, you will provide support to our major global pharmaceutical client by maintaining, troubleshooting, and repairing facility equipment across all systems. Your responsibilities will include carpentry work, plumbing, sheet metal maintenance, and troubleshooting. Additionally, you will be involved in patching and painting various areas, maintaining locking mechanisms and doors, performing roofing repairs, and ensuring the proper functioning of plumbing components. You will also analyze system operations, complete assigned work, conduct preventive maintenance tasks, and comply with safety protocols. This position requires proficiency in handling tools, working at heights, and operating necessary equipment.What your day-to-day will look like:Maintain, troubleshoot, and repair facility equipment across all systems, with a strong emphasis on hands-on work.Demonstrate proficiency in carpentry, plumbing, sheet metal, sheetrock maintenance, and troubleshooting.Patch and paint office, outdoor, and controlled work environments.Handle preparation, priming, and painting of building interior and exterior surfaces.Maintain locking mechanisms, closers, and doors.Perform general roofing repairs.Repair and maintain plumbing components such as toilets, urinals, lavatories, flush valves, sinks, drains, water heaters, piping, and sump pumps.Analyze system operations, identify and resolve any malfunctions or issues.Complete daily/weekly work assignments, including being on-call and performing additional duties as required.Oversee the operation, repair, preventive maintenance, and installation of piping and valves related to plumbing systems.Conduct preventive maintenance on base building and critical system equipment, ensuring minimal disruption, proper cleanup, and thorough reporting.Understand the engineering design and operational aspects of the building and critical support systems, capable of troubleshooting and responding to operational and emergency situations.Assess malfunctioning equipment and determine corrective actions required for restoration.Provide customer interface, including communicating with work order requestors and coordinating with client representatives to schedule repairs.Execute work efficiently, minimizing disruption and inconvenience.Drive team efficiency and provide oversight as needed.Adhere to departmental policies regarding the safe storage, usage, and disposal of hazardous materials.Complete all required training and comply with established training standards.Maintain tools and order supplies for installations and repairs.Ensure a clean and safe working environment, promptly addressing any environmental health and safety concerns.Work Schedule: Monday to Friday, 7:15 AM - 4:00 PMDesired or preferred experience and technical skills:Previous experience working in a Life Sciences or Medical facility a plus.Required Skills and ExperienceStrong knowledge and experience with piping/plumbing systems and mechanical systems.Proficient conflict resolution skills.Excellent written and oral communication skills.Good interpersonal skills; able to effectively communicate in both written and verbal reports.Basic computer skills proficiency.Ability to lift objects weighing up to 50lbs.Comfortable working at heights and performing overhead work.Skilled and physically capable of operating electric hand tools, working on ladders, carrying tools, lifting heavy loads, operating necessary equipment, and operating a motor vehicle.Capable of working in confined spaces such as closets, crawl spaces, attics, vaults, etc.Able to work on rooftops of buildings.#MMjobs

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together.TOTAL REWARDSConstellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more. PRIMARY PURPOSE OF POSITIONOperates, inspects and services plant equipment usually contained in a nuclear power plant. Operates manually controlled equipment and remotely controlled equipment from locations other than the central control room. Determines operating status of equipment from previous shift personnel and log entries. Checks cause of operating problems and reports to supervisor. Maintains a log recording unusual events and changes in operating conditions. Provides direction and provides operations training of all personnel. Perform fire protection duties such as response to fire, rescue, hazardous material incidences, first aid requirements, logs and record keeping. To be assigned as needed to support decon, housekeeping, painting work and other duties as assigned by the Company. Performs emergency response duties as assigned. This position requires the completion of the Equipment Operator qualification book.MINIMUM QUALIFICATIONSMust have satisfactorily completed college level training or equivalent in a minimum of three (3) math/science curriculum courses: physics, thermodynamics, fluid mechanics, electricity, chemistry and associated math. (The applicant may be required to demonstrate this required level of knowledge)Must meet the ANSI standard for this position.Must also have ability to read basic diagrams and printsMust pass required NRC license physical examination.Must be physically capable of performing the essential functions of this position.Must pass the POSS test or other validated aptitude test.May be subject to certification and recertification with periodic reviews if required by NRC or industry standards.Must meet requirement of NRC psychological testing regulations.Must satisfactorily complete Plant Access Training and complete the Radiation Safety Training including Respirator Qualifications and maintain unescorted access.Must complete fire brigade member qualifications based on operational needs.May be required to obtain CPR certification based on operational needs.Must complete Radwaste Level 1 and Level 2 qualifications.Starting Pay Rate $36.54

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HAS)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do:Responsible for meeting customer expectations while performing quality inspections.How you will do it:Perform routine inspections, testing, servicing, installing and preventative maintenance of life safety product lines as well as similar competitive manufacturer's product line.Work with low voltage wiring and associated devices for the operation of low voltage equipment.Learn to complete Service Acknowledgements with proper coding through communication devices, such as laptop computers and/or hard copy.Follow and maintain a highly structured inspection schedule.Input, retrieve and archive inspection documentation program via the laptop computer.Make minor repairs and programming changes while under the direct authorized supervision.Complete assigned inspections on time.Perform other duties as assigned.What we look for:RequiredHigh School Diploma or equivalent required.3-5 years documented experience in sprinkler systems preferredAble to obtain and retain any licenses that are required by National, State and Local codes.Experience in reading and interpreting blueprints, diagrams, submittals, specifications, programs schematics and operational/product manuals.Experience with hand tools and multi-meter usage.Experience with wet, dry, pre-action, deluge, fire pumps, and foam systemsDemonstrates an aptitude for troubleshooting systems and performing necessary repairs.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including on-call rotation, nights, and weekends to meet customer requirements.Willing to travel out of town including overnight lodging.Demonstrate a high level of customer service.Ability to adhere to, implement, and follow safety guidelines and procedures at all times.Strong organizational skills, positive attitude, and an ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.PreferredRepair experienceBackflow certificationNICET Level 2 certification in water based systems.HIRING HOURLY RANGE: $18-27 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at https://www.johnsoncontrols.com/careersJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit www.johnsoncontrols.com/careers.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPPmay be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits, like working5% bonus plan & Wages start at $25.19+ Maintenance Mechanic -Performs all required duties relating to installing and troubleshooting plant production equipment. This is a 1st shift position working Monday through Friday Overtime as needed. Major Responsibilities: Responsible for ordering and maintaining supplies to support all maintenance functions.Responsible for basic maintenance support for startup operations such as, lights, dust collectors, air filtration systems, etc.Monitor machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine.Dismantles defective machines and equipment and installs new or repaired parts.Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic equipment, and repairs and replaceDesign, assemble and install electronic control systems for production machinery and associated automated equipment’s gauges, valves, pressure regulators, and related equipment.Troubleshoot, maintain and repair machine level control systems, which utilize programmable logic controllers.Repairs and maintains physical structure of establishment.Responsible for adherence to all safety policies, practices and procedures. Requirements: Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; orrelated experience and/or training; or equivalent combination of education and experience.Experienced Forklift drivers preferred. Benefits: CPP-Steel Treaters e offers its employees a competitive compensation package which includes medical/dental/vision, Employer subsidized 401K, and life insurance. CPP-Steel Treaters, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations. Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Calls Please. Disclaimer:The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. Additional duties and responsibilities may be required of the job holder based upon business needs and at the request of CPP Management. It is the policy of CPP tocooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANSThis is a non-management positionThis is a full time position

Pay Rate: $15.00/hr - $24.00/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. Why Guitar Center Here’s just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assigned Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .Requirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products

Pay Rate: $15.00/hr - $24.00/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. Why Guitar Center Here’s just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assigned Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .Requirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products